HERNON MFG INC -- ANAEROBIC ADHESIVE 420  -- 8030-01-055-6126
<pre>=====================  Product Identification  =====================

Product ID:ANAEROBIC ADHESIVE 420
MSDS Date:02/01/1989
FSC:8030
NIIN:01-055-6126
=== Responsible Party ===
Company Name:HERNON MFG INC
Address:121 TECH DRIVE
City:SANFORD
State:FL
ZIP:32771
Country:US
Info Phone Num:407-322-4000
Emergency Phone Num:407-322-4000
CAGE:61603
=== Contractor Identification ===
Company Name:HERNON MANUFACTURING
Address:121 TECH DRIVE
Box:City:SANFORD
State:FL
ZIP:32771
Country:US
Phone:407-322-4000/800-255-3924
CAGE:61603

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYGLYCOL DIMETHACRYLATE
Fraction by Wt: 55-60%
Other REC Limits:NONE SPECIFIED

Ingred Name:SACCHARIN (SARA 313). SACCHARIN HAS BEEN SHOWN TO CAUSE
    TUMORS IN LAB ANIMALS WHEN FED IN LG AMTS FOR PROLONGED PERIODS.
CAS:81-07-2
RTECS #:DE4200000
Fraction by Wt: 1-3%
Other REC Limits:NONE SPECIFIED
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS

Ingred Name:N,N-DIALKYLTOLUIDINE
CAS:99-97-8
Fraction by Wt: <1%
Other REC Limits:NONE SPECIFIED

Ingred Name:CUMENE HYDROPEROXIDE (SARA 313). IN 1 EXPERIMENT, PURE
    CUMENE HYDROPEROXIDE CAUSED TUMORS IN 1 OF 30 LAB ANIMALS WHEN*
CAS:80-15-9
RTECS #:MX2450000
Fraction by Wt: 1-3%
Other REC Limits:*INJECTED UNDER SKIN
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS

Ingred Name:SILICON DIOXIDE. INHAL OF PURE SILICON DIOXIDE IN LG QTY
    HAS BEEN SHOWN TO CAUSE PULMONARY EFFECTS. DUE TO THE LOW CONC#
CAS:60676-86-0
RTECS #:VV7320000
Fraction by Wt: <2%
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293

Ingred Name:#OF THE COMPONENTS IN THE PROD, IT IS OUR TECHNICAL
    JUDGEMENT THAT UNDER NORMAL USE THIS PROD DOES NOT CAUSE ANY OF
    THE+
RTECS #:9999999ZZ
Other REC Limits:NONE SPECIFIED

Ingred Name:+ABOVE MENTIONED HAZARDS. THESE WARNINGS ARE PRESENT ONLY
    TO COMPLY WITH OSHA REGULATIONS.
RTECS #:9999999ZZ
Other REC Limits:NONE SPECIFIED

Ingred Name:POLYESTER PLASTISIZER
Fraction by Wt: 30-35%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Explanation of Carcinogenicity:AS DEFINED BY NTP, IARC AND OSHA THERE
    ARE NOT CARCINOGENS IN THIS FORMULATION.
Effects of Overexposure:PROLONGED CONTACT WITH SENSITIVE INDIVIDUALS
    MAY CAUSE DERMATITIS.
Medical Cond Aggravated by Exposure:SKIN IRRITATION.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH WATER. SKIN: FLUSH WITH WATER. INGESTION: DO
    NOT INDUCE VOMITING, SEEK MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:200F,93C
Extinguishing Media:FOAM, DRY CHEMICAL, CO2.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AND
    PROTECTIVE CLOTHING SHOULD BE WORN WHEN FIGHTING FIRES INVOLVING
    CHEMICALS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SOAK UP IN INERT ABSORBENT. STORE IN CLOSED
    CONTAINER UNTIL DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID PROLONGED SKIN CONTACT. KEEP
    AWAY FROM CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Ventilation:LOCAL EXHAUST NECESSARY. SPECIAL NORMALLY NOT NEEDED.
Protective Gloves:SAFETY GLOVES ARE RECOMMENDED.
Eye Protection:SAFETY GLASSES ARE RECOMMENDED.
Other Protective Equipment:NOT NECESSARY.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:T6
Boiling Pt:B.P. Text:>300 F
Vapor Pres:<5 @ 80 F
Spec Gravity:1.05 @ 80 F
Evaporation Rate &amp; Reference:POLYMERIZE/BU ACETATE =1
Solubility in Water:LOW
Appearance and Odor:PURPLE LIQUID, MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:STRONG OXIDIZING AGENTS AND METALLIC
    SALTS.
Conditions to Avoid Polymerization:EXCESSIVE HEAT.

====================  Disposal Considerations  ====================

Waste Disposal Methods:BURY OR INCINERATE IN ACCORDANCE WITH LOCAL AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.