GLIDDEN COMPANY -- 0600113 LN 601 LIQUID NAILS FOR PROJECTS -- 8040-01-259-9971 
=====================  Product Identification  =====================

Product ID:0600113 LN 601 LIQUID NAILS FOR PROJECTS
MSDS Date:02/03/1993
FSC:8040
NIIN:01-259-9971
=== Responsible Party ===
Company Name:GLIDDEN COMPANY
Address:925 EUCLID AVENUE
City:CLEVELAND
State:OH
ZIP:44115
Country:US
Info Phone Num:216-344-8000/800-545-2643
Emergency Phone Num:800-545-2643/216-826-5566
CAGE:01PD6
=== Contractor Identification ===
Company Name:GLIDDEN PAINT, ICI PAINTS NORTH AMERICA
Address:925 EUCLID AVE
Box:City:CLEVELAND
State:OH
ZIP:44115
Country:US
Phone:800-545-2643/216-344-8207
CAGE:01PD6

=============  Composition/Information on Ingredients  =============

Ingred Name:STEAM-CRACKED, POLYMERS W/LIGHT STEAM-CRACKED PETROLEUM
    NAPHTHA					  *94-3*
CAS:68410-16-2
Fraction by Wt: 5-10%

Ingred Name:CARBONIC ACID, CALCIUM SALT (1:1), CALCIUM CARBONATE,
    DURAMITE
CAS:471-34-1
RTECS #:FF9335000
Fraction by Wt: 1-5%
Other REC Limits:10 MG/CUM (DUST)
OSHA PEL:5 MG/CUM
ACGIH TLV:10 MG/CUM

Ingred Name:CLAY (KAOLIN), ALUMINUM SILICATE
CAS:1332-58-7
RTECS #:GF1670500
Fraction by Wt: 30-40%
OSHA PEL:5 MG/CUM
ACGIH TLV:10 MG/CUM TOTAL DUST

Ingred Name:LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA, LACOLENE
CAS:64742-89-8
Fraction by Wt: 20-30%
OSHA PEL:300 PPM
ACGIH TLV:300 PPM

Ingred Name:HEXANE, N-HEXANE
CAS:110-54-3
RTECS #:MN9275000
Fraction by Wt: 5-10%
Other REC Limits:50 PPM
OSHA PEL:50 PPM
ACGIH TLV:50 PPM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:RESIN ACIDS & ROSIN ACIDS, ESTERS W/GLYCEROL   *94-3*
CAS:8050-31-5
Fraction by Wt: 5-10%

Ingred Name:1,3-BUTADIENE POLYMER, STYRENE-BUTADIENE POLYMER, SBS, SBS
    (BLOCK POLYMER)
CAS:9003-55-8
RTECS #:WL6478000
Fraction by Wt: 5-10%

Ingred Name:BUTADIENE, STYRENE, DIVINYLBENZENE POLYMER
CAS:26471-45-4
Fraction by Wt: 5-10%

Ingred Name:STEAM-CRACKED, POLYMERS W/LIGHT STEAM-CRACKED PETROLEUM
    NAPHTHA					  *94-4*
CAS:68410-16-2
Fraction by Wt: 10-20%

Ingred Name:1,3-BUTADIENE POLYMER, STYRENE-BUTADIENE POLYMER, SBS, SBS
    (BLOCK POLYMER)
CAS:9003-55-8
RTECS #:WL6478000
Fraction by Wt: 1-5%

Ingred Name:BUTADIENE, STYRENE, DIVINYLBENZENE POLYMER
CAS:26471-45-4
Fraction by Wt: 5-10%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF RESPIRATORY
    TRACT. PROLONGED CONTACT CAUSES CNS DEPRESSION. SKIN: IRRITATION.
    PROLONGED/REPEATED CONTACT CAUSES DERMATITIS. EYES: IRRITATION.
    INGESTION: GI DISTURBANCES, CNS  DEPRESSION. ASPIRATION OF MATERIAL
    INTOLUNGS CAUSES LUNG INFLAMMATION/DAMAGE. (SEE SUPP)
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, DEFATTING, WATERING, HEADACHES,
    DIZZINESS, OTHER DISCOMFORT.
Medical Cond Aggravated by Exposure:PRE-EXISTING EYE, SKIN &
    RESPIRATORY DISORDERS

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE/SUPPORT CONTINUED
    BREATHING. HAVE TRAINED PERSON GIVE OXYGEN IF NECESSARY. SKIN:
    FLUSH W/WATER THEN WASH THOROUGHLY W/SOAP & WATER. EYES: FLUSH
    IMMEDIATELY W/L ARGE AMOUNTS OF WATER FOR 15 MINS. OBTAIN MEDICAL
    ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point:1F
Lower Limits:1
Upper Limits:7.5
Extinguishing Media:DRY CHEMICAL, FOAM, WATER FOG, CO2
Fire Fighting Procedures:WEAR SCBA, EYE PROTECTION & FULL PROTECTIVE
    CLOTHING. WATER MAY BE USED TO COOL & PROTECT EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT/FIRE. VAPORS MAY IGNITE EXPLOSIVELY AT
    AMBIENT TEMPS/MAY TRAVEL TO DISTANT IGNITION SOURCE/FLASHBACK.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. VENTILATE AREA
    W/EXPLOSION PROOF EQUIPMENT. COLLECT W/ABSORBENT MATERIALS. USE
    NON-SPARKING TOOLS. PLACE COLLECTED MATERIAL IN PROPER CONTAINER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE BELOW 80F. KEEP AWAY FROM HEAT,
    SPARKS, OPEN FLAME. USE ONLY W/ADEQUATE VENTILATION. KEEP
    CONTAINERS TIGHTLY CLOSED/UPRIGHT WHEN NOT IN USE.
Other Precautions:DON'T TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.
    AVOID CONTACT W/SKIN & EYES/BREATHING VAPORS. GROUND EQUIPMENT WHEN
    TRANSFERRING TO PREVENT ACCUMULATION OF STATIC CHARGE. AVOID
    CONDITIONS RESULT ING IN FORMATION OF INHALABLE PARTICLES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS WHEN
    REQUIRED.
Ventilation:DILUTION/LOCAL EXHAUST TO PREVENT BUILD UP OF VAPORS.
    NON-SPARKING/EXPLOSION PROOF EQUIPMENT.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:EYE WASH, SAFETY SHOWER, IMPERVIOUS
    APRON/BOOTS.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE. WASH HANDS THOROUGHLY AFTER HANDLING/BEFORE EATING/SMOKING.
Supplemental Safety and Health
HEALTH HAZARDS CONT'D: REPEATED/PROLONGED OVEREXPOSURE TO SOLVENTS
    CAUSES PERMANENT BRAIN/NERVOUS SYSTEM DAMAGE. INTENTIONAL MISUSE BY
    DELIBERATELY CONCENTRATING/INHALING CONTENTS MAY BE HARMFUL/FATAL .
    PROLONGED/REPEATED INHALATION OF N-HEXANE MAY PRODUCE PERIPHERAL
    NERVE DAMAGE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:156F
Spec Gravity:1.099
Appearance and Odor:TAN PASTE
Percent Volatiles by Volume:48.58

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZERS
Stability Condition to Avoid:EXTREME HEAT, SPARKS, OPEN FLAME, OTHER
    IGNITION SOURCES.
Hazardous Decomposition Products:CO & CO2

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
    REGULATIONS. ADHESIVE, FLAMMABLE LIQUID. UN1133

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.